Horsepower / Torque Converter
Powertrain Engineering & Dynamometer Physics
Horsepower & Torque Converter – Calculate HP from Torque & RPM
Convert mechanical horsepower, kilowatts, and metric PS, or calculate power directly from engine torque and RPM using fundamental internal combustion and electric motor dynamics.
Calculation / Conversion Mode
The 5,252 RPM Dynamometer Rule
Because Horsepower = (Torque × RPM) / 5252, horsepower and torque (in lb-ft) are ALWAYS equal at exactly 5,252 RPM on any dynamometer curve. Below 5,252 RPM, torque is always higher than HP; above 5,252 RPM, horsepower is always higher.
Engineering Output
Calculated Powertrain Output
0 HP
At 6,500 RPM
Kilowatts (kW)
0 kW
metric electrical / EV
Metric PS / Cavalli
0 PS
European DIN standard
Newton-Metres (Nm)
0 Nm
SI rotational torque
Pound-Feet (lb-ft)
0 lb-ft
Imperial torque
RPM Dyno Status
Crank vs Wheel Power Note: Engine manufacturer ratings represent Brake Horsepower (BHP) at the flywheel/crankshaft. Chassis dynamometer roller runs measure Wheel Horsepower (WHP), which is typically 12% to 18% lower due to transmission and differential parasitic friction.